Tile & Grout Cream – High Performance Grime, Wax & Paint Remover

Tile & Grout Cream is a high-performance ready-to-use cleaning paste formulated with advanced nano-colloidal chemistry and a specialty micro-abrasive to tackle stubborn residues, films and embedded grime that conventional cleaners can struggle to remove.

Its unique penetrating formula helps break down and separate wax coatings, grout haze, grease, oil, paint, bitumen, gum, cosmetics and other stubborn residues from hard surfaces, making them easier to remove. The thickened cream consistency also makes it highly effective on vertical surfaces where controlled application and extended dwell time are required.

Suitable for a wide range of hard surfaces, Tile & Grout Cream is ideal for restoration cleaning, construction clean-up, tile preparation and deep cleaning across commercial, hospitality, industrial and property maintenance environments.

Key Benefits

• Powerful Residue Removal: Breaks down tough wax films, grout haze, grease, oil, paint, gum and embedded grime.
• Advanced Penetration: Nano-colloidal chemistry helps penetrate and separate soils and coatings from the surface.
• Micro-Abrasive Action: Assists with removing stubborn grout haze and residues.
• Factory Wax Removal: Helps remove factory-applied wax coatings from porcelain.
• Vertical Surface Cleaning: Thickened cream formulation stays in place for controlled cleaning on walls and other vertical surfaces.
• Versatile Hard Surface Cleaner: Suitable for tiles, natural stone, porcelain, concrete and other hard surfaces.
• Restoration Ready: Ideal for removing accumulated grime, coatings and residues from modern and heritage surfaces.
• Ready to Use: No dilution or mixing required.
• Citrus Fragrance: Orange citrus fragrance for a more pleasant cleaning experience.

Ideal Applications

Tile & Grout Cream is suitable for removing:

• Grout haze from tiles and stone
• Wax and protective coatings
• Grease and oil
• Deep-set grime
• Paint spots
• Bitumen
• Gum and sticky residues
• Food and beverage stains
• Cosmetics
• Construction and installation residues

Suitable for natural stone, ceramic and porcelain, concrete and masonry, rubber and vinyl. Always pre-test in an inconspicuous area before use, particularly on delicate or sensitive finishes.

How to Use

Always read and understand the SDS before use and pre-test the product for substrate sensitivity.

Floor Surfaces:

1. Apply Tile & Grout Cream directly to the affected area.
2. Scrub using a slow-speed scrubber fitted with a suitable nylon pad or brush.
3. Allow 10–20 minutes dwell time to penetrate, dissolve and lift oily soils or wax films.
4. Scrub again and rinse thoroughly with clean water or detergent solution.

Vertical Surfaces:

1. Apply directly to the surface or onto a non-scratch nylon scouring pad.
2. Spread over the affected area and agitate.
3. Allow 5–10 minutes dwell time.
4. Scrub or agitate thoroughly and rinse well with clean water.

Product Details

• Product: Tile & Grout Cream
• Product Code: AP152
• Type: Hard Surface & Residue Remover
• pH: 6
• Dilution: Ready to Use
• Fragrance: Orange Citrus
• Colour: White
• Pack Size: 5L
• Suitable Surfaces: Natural Stone, Ceramic & Porcelain, Concrete & Masonry, Rubber, Vinyl