Skip to product information
1 of 1

Actichem

Percide – Hospital-Grade Disinfectant & Mould Remover - 750ml

Percide – Hospital-Grade Disinfectant & Mould Remover - 750ml

Regular price $27.00 AUD
Regular price Sale price $27.00 AUD
Sale Sold out

Percide – Hospital-Grade Disinfectant & Mould Remover

Actichem Percide (AP610) is a TGA-listed, hospital-grade peroxide disinfectant designed for professional disinfection, mould remediation and decontamination of bio-contaminated environments. Its advanced peroxide and super-wetting technology penetrates porous surfaces to target mould spores, bacteria and viruses.

Percide provides rapid disinfection, mould eradication, stain removal and odour control, making it suitable for professional cleaning, mould remediation, healthcare and other high-risk environments.

Key Benefits

  • Hospital-grade disinfectant – TGA listed (AUST L 332284)
  • Advanced peroxide formulation for mould remediation
  • Kills mould and helps remove mould staining
  • Rapid biocidal action against bacteria and viruses
  • Deep-penetrating wetting technology for porous surfaces
  • Helps eliminate odours at their source
  • Ready-to-use formulation for convenient application
  • Suitable for a wide range of hard and soft surfaces
  • Can be combined with Percide Boost for heavy mould contamination

Ideal Applications

  • Mould remediation
  • Healthcare and hospital environments
  • Bio-contaminated areas
  • Biological waste decontamination
  • Commercial and professional cleaning
  • Carpet and upholstery
  • Natural stone, ceramic and porcelain
  • Concrete, masonry and plasterboard
  • Timber, rubber and vinyl

Directions for Use

  1. Remove all wet and dry debris from the affected area.
  2. Apply Percide generously, ensuring complete surface contact.
  3. Agitate where possible to improve penetration into porous substrates.
  4. Allow a minimum 1 minute dwell time for disinfection and 10 minutes for mould remediation.
  5. Rinse thoroughly with clean water.
  6. Repeat where heavy mould contamination requires further treatment.

For Heavy Mould: Mix 9 parts Percide with 1 part Percide Boost. Use the mixed solution within 8 hours.

Product Details

  • Product Code: AP610.750
  • pH: 5.5–6
  • Dilution: Ready to use
  • Accreditation: TGA Listed
  • Fragrance: None
  • Colour: Clear
  • Pack Size: 750ml
  • Surfaces: Carpet, natural stone, upholstery, ceramic & porcelain, concrete & masonry, plasterboard, rubber, timber and vinyl
  • Safety: Warning

Important: Always pre-test surfaces for chemical sensitivity and follow the product label, SDS and applicable safety directions before use.

Additional Information

Benefits

  • Disinfects bio-contaminated surfaces.
  • Kills mould and removes the staining.
  • Advanced Peroxide Formula: Percide comprises a unique peroxide formula for incredible disinfection and mould eradication performance in a low-toxic, easy-to-use form.
  • Penetration: To provide ultimate sanitisation of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the biocide to penetrate faster and deeper into the inner structure of the fibre and porous substrates.
  • Cleaning and Destaining: Percide lifts mould from surface pores and provides incredible cleaning and destaining action on mould and bacterial discolouration.
  • Eliminates odours: Percide eliminates odours at their source by powerful antimicrobial action against odour-causing germs.
  • Environmentally Safe: Percide is inherently biodegradable and is a great, environmentally responsible choice. Safe for use in food environments.

Directions for use

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use. Percide is safe for use on many synthetic carpets and fabrics; however, see notes regarding the use of Percide on carpet & fabric. It should also be noted that fibres destabilised by disaster activity could be affected

Mixing

No dilution necessary.
For enhanced mould build-up removal and biocidal action, mix 9 parts Percide and 1 part Percide Boost (Use within 8 hours).

Application

  1. Remove and clean away all wet and dry debris.
  2. Apply Percide solution to the affected area. Ensure all surfaces come into contact with Percide solution. Application can be by means of spray, wet fog, mop or cloth. See notes regarding wet fog application.
  3. Agitate briefly, where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal.
  4. Allow a minimum of 1 minute dwell time for disinfection and 10 minutes dwell time for mould remediation.
  5. Rinse thoroughly with clean water.
  6. Repeating this process may be required for heavy mould conditions.

Note

  • For heavy mould situations, mix Percide with Percide Boost for accelerated mould eradication and cleaning performance.
  • Agitate thoroughly to achieve a perfect result.
  • After cleaning and disinfection is completed, Percide can be applied as a post-residual treatment for enhanced inhibition of fresh mould growth.
View full details