{"product_id":"stone-sealer-pro-penetrating-sealer-for-natural-stone-and-tiles-5l","title":"Stone Sealer Pro  Penetrating sealer for natural stone and tiles - 5L","description":"\u003cp\u003eStone Sealer Pro is a premium water-based penetrating sealer designed to protect marble, limestone, travertine, granite, and bluestone. It uses advanced fluorochemical polymer technology to form a highly repellent surface, providing lasting protection for interior and exterior stone.\u003c\/p\u003e\n\u003cp\u003eStone Sealer Pro solves the challenge of protecting fine stone from stains, weathering, and oil or water-borne contaminants. Its vapour-permeable formula prevents moisture entrapment while preserving the natural finish. Ideal for use on walls, floors, patios, walkways, and feature areas, it offers up to 7 years of protection, is NATA-tested, and Green Star compliant. Clean with Actichem Tile \u0026amp; Grout Cleaner LF to extend performance. Not suitable for sub-terrain waterproofing.\u003c\/p\u003e\n\u003cp\u003epH: Water-Based \u003cbr\u003eDilution:  Ready to use \u003cbr\u003eFragrance: None \u003cbr\u003eSafety: Non-hazardous \u003cbr\u003eSize: 5lt\u003cbr\u003eSurfaces: Natural Stone, Concrete \u0026amp; Masonry \u003cbr\u003eCode: AP172 \u003c\/p\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePremium Protection: Offers up to 7 years of protection, independently performance-tested by a NATA-approved laboratory.\u003c\/li\u003e\n\u003cli\u003eDual Protection: Shields against water and oil-borne contaminants, including food and beverage stains, oil and grease, biological growth (mould and mildew), efflorescence, pollution, and weathering.\u003c\/li\u003e\n\u003cli\u003eNatural Look: Maintains the original appearance of the stone without discoloration or alteration.\u003c\/li\u003e\n\u003cli\u003eUV Stable: Suitable for both indoor and outdoor use, withstanding UV exposure.\u003c\/li\u003e\n\u003cli\u003eVapour Permeable: Allows the natural passage of water vapour, preventing moisture entrapment.\u003c\/li\u003e\n\u003cli\u003eNon-Flammable and Low VOC: Safe to use with very low VOC content and Green Star Approved.\u003c\/li\u003e\n\u003cli\u003eGreen Star Approved: Meets the VOC requirements of Green Star Design V3 IEQ-13.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication areas and surface suitability\u003c\/h3\u003e\n\u003cp\u003eFormulated to provide premium protection from staining to medium to high porosity fine stone, masonry, clay \u0026amp; cement products. Ideal applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarble, Limestone, Travertine\u003c\/li\u003e\n\u003cli\u003eSandstone \u0026amp; Bluestone\u003c\/li\u003e\n\u003cli\u003eCement \u0026amp; Clay pavers\u003c\/li\u003e\n\u003cli\u003eTerracotta, Saltillo, Quarry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdeal for all interior and exterior applications.\u003cbr\u003eExcellent protection afforded to fine stone flooring and walls, outdoor stone features, patios, walkways, concrete and clay paving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear:\u003c\/strong\u003e\u003cbr\u003eStone Sealer Pro will provide premium protection for up to 5 years. However application methods, weather conditions, traffic, harsh cleaning methods and stone type will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life.\u003cbr\u003eCleaning with Actichem Proneutro is advised.\u003cbr\u003eIt is recommended that the sealer be re-applied every 2 to 3 years where harsh conditions exist.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsiderations:\u003c\/strong\u003e\u003cbr\u003eNot to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 40 degrees or if rain is expected within 2 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely.\u003c\/p\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cp\u003eRead and understand the SDS before use\u003cbr\u003eAlways pre-test in an inconspicuous location for sensitivity to chemicals.\u003c\/p\u003e\n\u003cp\u003eCoverage can vary dramatically depending on the degree of porosity, but is normally 5 to 10 m2 \/ Lt per coat for open structure, highly porous substrates. And 10 to 20 m2 \/ Lt per coat for dense, less porous substrates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eApplication on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment. No subsequent removal of excess product is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew installations must be fully cured before application of Stone Sealer Pro (Min 48 hours, however some concrete installations may take up to 7 days to cure. Confirm with the structural engineer).\u003c\/li\u003e\n\u003cli\u003eExisting stone and grout must be totally clean, dry and chemical free.\u003c\/li\u003e\n\u003cli\u003eCoverage can vary dramatically depending on the degree of porosity, but is normally 5 to 15 m2 \/ Lt per coat for open structure, highly porous substrates and 10 to 20 m2 \/ Lt per coat for dense, less porous substrates.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight. Temperature must be between 10°C and 28°C.\u003c\/li\u003e\n\u003cli\u003eHighly absorbent surfaces may require two coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cp\u003eReady to use\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply 1 to 3 coats of Stone Sealer Pro by generously saturating the surface using a polish applicator, roller or sprayer to an area which can be easily reached. (Approximately 15m2).\u003c\/li\u003e\n\u003cli\u003eEnsure even coverage.\u003c\/li\u003e\n\u003cli\u003eThe surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied.\u003c\/li\u003e\n\u003cli\u003eAllow 5 – 10 minutes for the sealer to absorb into the surface and then move the excess product with a squeegee to a new section.\u003cbr\u003eIf a second coat is to be applied, wait 20 to 30 minutes and repeat the process.\u003c\/li\u003e\n\u003cli\u003eUsing absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface.\u003c\/li\u003e\n\u003cli\u003eAllow 12 hours before returning area to traffic. Keep dry for 24 hours. Achieves a full cure in 24-48 hours.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Actichem","offers":[{"title":"Default Title","offer_id":45364234387510,"sku":null,"price":253.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/6542\/2134\/files\/AP172.jpg?v=1776225230","url":"https:\/\/www.bpmtrading.com.au\/products\/stone-sealer-pro-penetrating-sealer-for-natural-stone-and-tiles-5l","provider":"BPM Trading Company Pty Ltd","version":"1.0","type":"link"}