{"product_id":"solv-sealer-pro-economic-penetrating-sealer-for-stone-and-tiles-5l","title":"Solv Sealer Pro  Economic penetrating sealer for stone and tiles - 5L","description":"\u003cp\u003eSolv Sealer Pro is a premium solvent-based penetrating sealer engineered for dense surfaces such as polished porcelain, fine stone, and low-porosity tiles. Powered by ultra-small molecule technology, it penetrates deep into the substrate to form a durable sub-surface barrier against both oil- and water-based contaminants.\u003c\/p\u003e\n\u003cp\u003eSolv Sealer Pro solves the challenge of protecting delicate yet dense materials from staining and environmental wear without altering their appearance. Its advanced chemistry ensures long-lasting protection for polished porcelain, dense granite, slate, quarry tiles, grout lines, and terracotta. Ideal for indoor and outdoor applications, it should be applied in mild conditions and reapplied every 2–3 years in high-exposure areas. Clean sealed surfaces with Actichem Tile \u0026amp; Grout Cleaner LF to maintain performance and finish.\u003c\/p\u003e\n\u003cp\u003epH: Solvent\u003c\/p\u003e\n\u003cp\u003eDilution: Ready to use\u003c\/p\u003e\n\u003cp\u003eFragrance: Solvent\u003c\/p\u003e\n\u003cp\u003eSafety: Class 3 Flammable\u003c\/p\u003e\n\u003cp\u003eColour: Clear\u003c\/p\u003e\n\u003cp\u003eSize: 5lt\u003c\/p\u003e\n\u003cp\u003eSurfaces: Natural Stone, Concrete \u0026amp; Masonry\u003c\/p\u003e\n\u003cp\u003eCode: AP169\u003c\/p\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePremium Protection: Provides exceptional protection for up to 5 years, with performance tested by a NATA-approved stone laboratory.\u003c\/li\u003e\n\u003cli\u003eDual Protection: Shields against a wide range of contaminants, including food and beverage stains, oil and grease stains, biological growth (mould and mildew), efflorescence, pollution, and weathering.\u003c\/li\u003e\n\u003cli\u003eRetains Newness: Specifically formulated to protect granite, polished marble, polished porcelain, and similar low porosity substrates without altering their appearance.\u003c\/li\u003e\n\u003cli\u003eNatural Look: Maintains the original appearance of surfaces without discoloration or alteration.\u003c\/li\u003e\n\u003cli\u003eUV Stable: Suitable for both indoor and outdoor applications.\u003c\/li\u003e\n\u003cli\u003eVapour Permeable: Allows the natural passage of water vapour, preventing moisture entrapment.\u003c\/li\u003e\n\u003cli\u003eSafe to Use: Features a very low VOC content, making it user-friendly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication areas and surface suitability\u003c\/h3\u003e\n\u003cp\u003eFormulated to provide premium protection from staining to all forms of tiles and fine stone, but performs with special distinction on low porosity and dense tile and stone, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished porcelain, unglazed \u0026amp; semi-vitrified ceramics and grout.\u003c\/li\u003e\n\u003cli\u003ePolished and\/or dense granite, marble and fine stone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso provides excellent protection to: Terracotta, Saltillo, Slate, Quarry, Terrazzo and Grout lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear:\u003c\/strong\u003e\u003cbr\u003eSolv Sealer Pro will provide excellent protection for up to 5 years. However application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life. Cleaning with Actichem Proneutro is recommended. It is recommended that the sealer should be re-applied every 2 – 3 years where harsh conditions exist.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsiderations:\u003c\/strong\u003e\u003cbr\u003eNot to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 40 degrees or if rain is expected within 2 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely.\u003c\/p\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cp\u003eRead and understand the SDS before use\u003cbr\u003eAlways pre-test in an inconspicuous location for sensitivity to chemicals.\u003c\/p\u003e\n\u003cp\u003eCoverage can vary dramatically depending on the degree of porosity, but is normally 5 to 10 m2 \/ Lt per coat for open structure, highly porous substrates. And 10 to 20 m2 \/ Lt per coat for dense, less porous substrates.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e750 linear meters per litre (2 coats on 3mm grout).\u003c\/li\u003e\n\u003cli\u003e260 linear meters per litre (2 coats on 8mm grout)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eApplication on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment. No subsequent removal of excess product is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew installations must be fully cured before application of Defender CSD 50 (Min 48 hours, however some concrete installations may take up to 7 days to cure. Confirm with the structural engineer).\u003c\/li\u003e\n\u003cli\u003eExisting stone and grout must be totally clean, dry and chemical free.\u003c\/li\u003e\n\u003cli\u003eCoverage can vary dramatically depending on the degree of porosity, but is normally 5 to 15 m2 \/ Lt per coat for open structure, highly porous substrates and 10 to 20 m2 \/ Lt per coat for dense, less porous substrates.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight. Temperature must be between 10°C and 28°C.\u003c\/li\u003e\n\u003cli\u003eHighly absorbent surfaces may require two coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cp\u003eReady to use\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply 1 to 2 coats of Solv Sealer Pro by generously saturating the surface using a polish applicator, roller or sprayer to an area which can be easily reached. (Approximately 15m2).\u003c\/li\u003e\n\u003cli\u003eEnsure even coverage.\u003c\/li\u003e\n\u003cli\u003eThe surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied.\u003c\/li\u003e\n\u003cli\u003eAllow 5 – 10 minutes for the sealer to absorb into the surface and then move the excess product with a squeegee to a new section.\u003c\/li\u003e\n\u003cli\u003eIf a second coat is to be applied, wait 20 to 30 minutes and repeat the process.\u003c\/li\u003e\n\u003cli\u003eUsing absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface.\u003c\/li\u003e\n\u003cli\u003eAllow 6 hours before returning area to traffic. Keep dry for 12 hours. Achieves a full cure in 24-48 hours.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Actichem","offers":[{"title":"Default Title","offer_id":45364414054454,"sku":null,"price":247.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/6542\/2134\/files\/AP169.jpg?v=1776227548","url":"https:\/\/www.bpmtrading.com.au\/products\/solv-sealer-pro-economic-penetrating-sealer-for-stone-and-tiles-5l","provider":"BPM Trading Company Pty Ltd","version":"1.0","type":"link"}