{"product_id":"pre-seal-penetrating-presealer-for-natural-stone-5l","title":"Pre-seal Penetrating presealer for natural stone - 5L","description":"\u003cp\u003ePre-seal is a pre-installation treatment that inhibits moisture ingress into fine stone, masonry, and cement surfaces during construction. It preserves adhesive bond strength while preventing tile warping and installation defects.\u003c\/p\u003e\n\u003cp\u003ePre-seal solves the challenge of moisture-related issues during installation by forming a breathable barrier that repels water without trapping vapour. It is ideal for marble, limestone, travertine, sandstone, granite, basalt, bluestone, terracotta, saltillo, clay pavers, and quarry tiles. Designed for use in conjunction with Actichem’s penetrating sealers, Pre-seal ensures a stable and defect-free installation while enhancing long-term surface protection.\u003c\/p\u003e\n\u003cp\u003epH: Water-Based\u003c\/p\u003e\n\u003cp\u003eDilution: Ready to use\u003c\/p\u003e\n\u003cp\u003eFragrance: None\u003c\/p\u003e\n\u003cp\u003eSafety: Non-hazardous\u003c\/p\u003e\n\u003cp\u003eColour: Clear\u003c\/p\u003e\n\u003cp\u003eSize: 5lt\u003c\/p\u003e\n\u003cp\u003eSurfaces: Natural Stone, Concrete \u0026amp; Masonry\u003c\/p\u003e\n\u003cp\u003eCode: AP171\u003c\/p\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Application: Penetrates quickly and is simple to apply.\u003c\/li\u003e\n\u003cli\u003eRetains Newness: Provides premium protection against staining and water absorption during fabrication, transport, and installation.\u003c\/li\u003e\n\u003cli\u003eProtects: Facilitates easier grout smear removal, helps prevent “framing” caused by grout moisture ingress, and guards against construction and installation stains.\u003c\/li\u003e\n\u003cli\u003eVapour Permeable: Allows the natural passage of water vapour without trapping moisture.\u003c\/li\u003e\n\u003cli\u003ePrevents Installation Defects: Significantly reduces the risk of tile warping and other installation defects.\u003c\/li\u003e\n\u003cli\u003eAdds Value: Enhances the durability and longevity of the product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication areas and surface suitability\u003c\/h3\u003e\n\u003cp\u003eFormulated to provide premium protection to construction and fine stone, masonry and cement products during fabrication, transportation and installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarble, Limestone, Travertine\u003c\/li\u003e\n\u003cli\u003eSandstone, Granite, Basalt \u0026amp; Bluestone\u003c\/li\u003e\n\u003cli\u003eCement \u0026amp; Clay pavers\u003c\/li\u003e\n\u003cli\u003eTerracotta, Saltillo, Quarry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cp\u003eRead and understand the SDS before use.\u003cbr\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial surface must be totally clean, dry and chemical free.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight. Apply at temperatures between 10°C and 28°C.\u003c\/li\u003e\n\u003cli\u003eCoverage is 5 to 20m2 \/ Litre per coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cp\u003eReady to Use – No dilution necessary.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply 1 coat of Pre-seal by generously saturating the surface using a polish applicator, roller or sprayer to stone. Ensure even coverage.\u003c\/li\u003e\n\u003cli\u003eDip-sealing is also an approved method for six-sided sealing.\u003c\/li\u003e\n\u003cli\u003eThe surface must be shiny wet with a liquid film for at least 30 seconds. For very porous substrates more sealer may need to be applied.\u003c\/li\u003e\n\u003cli\u003eAllow 5 – 10 minutes for the sealer to absorb into the surface and then remove the excess with a clean dry towel.\u003c\/li\u003e\n\u003cli\u003eUsing absorbent toweling or an applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface.\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours before fabrication or installation. Keep dry for 12 hours. Achieves a full cure in 24-48 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Actichem","offers":[{"title":"Default Title","offer_id":45364233142326,"sku":null,"price":51.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/6542\/2134\/files\/AP171.webp?v=1776224935","url":"https:\/\/www.bpmtrading.com.au\/products\/pre-seal-penetrating-presealer-for-natural-stone-5l","provider":"BPM Trading Company Pty Ltd","version":"1.0","type":"link"}